Air dryer
Low Pressure
The simplest way of removing moisture from compressed air is to reduce the temperature. In a Refrigerated Air Dryer compressed air is passed through a heat exchanger where cold refrigerant at around 3 degrees is passed through the other side of the heat interchanger. At this temperature, most of the moisture is condensed which is then separated and drained out in the moisture separator.
Salient Feature:
- Simple Non Cyclic operation.
- Low operating cost.
- Low Noise.
- Zero Purge Loss.
- Even lubricated air can be dried.
- Suitable for any capacity.
- PDP of 3 Deg C.
- Electronic Control.
Application:
- Chemical
- Pharmaceutical
- Pneumatic Tools
- Painting Booth
- Pneumatic Control System
- Automobiles
technical specifications
| Model | Maximum Working Pressure |
Air Treatment Capacity |
Supply Voltage | Power Consumption |
Air Out Connection |
Dimensions (inch) |
Weight (kg) |
Refrigerant |
|---|---|---|---|---|---|---|---|---|
| SAS20 | 16 BAR | 20CFM | 230 V | 1.5 | 1/2" | 26"*16"*25" | 50 | R-134 |
| SAS40 | 16 BAR | 40CFM | 230 V | 2 | 1/2" | 26"*16"*25" | 55 | R-134 |
| SAS60 | 16 BAR | 60CFM | 230 V | 3 | 1/2" | 31.5"*19"*27.5" | 75 | R-134 |
| SAS80 | 16 BAR | 80CFM | 230 V | 4 | 1" | 35"*26"*36" | 120 | R-22 |
| SAS100 | 16 BAR | 100CFM | 230 V | 4 | 1" | 35"*26"*36" | 120 | R-22 |
| SAS150 | 16 BAR | 150CFM | 230 V | 5 | 1" | 35"*26"*36" | 130 | R-22 |
| SAS200 | 16 BAR | 200CFM | 415V | 4.5 | 1.5" | 45"*26"*37" | 180 | R-22 |
| SAS250 | 16 BAR | 250CFM | 415V | 6 | 2" | 45"*26"*37" | 200 | R-22 |
| SAS300 | 16 BAR | 300CFM | 415V | 6.5 | 2" | 45"*26"*37" | 225 | R-22 |
| SAS400 | 16 BAR | 400CFM | 415V | 7 | 2" | 65"*30"*42" | 400 | R-22 |
| SAS500 | 16 BAR | 500CFM | 415V | 8 | 2" | 65"*30"*42" | 450 | R-22 |
| SAS600 | 16 BAR | 600CFM | 415V | 8 | 2" | 65"*30"*42" | 520 | R-22 |
| SAS750 | 16 BAR | 750CFM | 415V | 8.5 | 4" | 65*36*48 | R-22 | |
| SAS1000 | 16 BAR | 1000CFM | 415V | 9 | 4" | 65*36*48 | R-22 | |
| SAS1200 | 16 BAR | 1200CFM | 415V | 12 | 4" | R-22 | ||
| SAS1500 | 16 BAR | 1500CFM | 415V | 12 | 4" | R-22 | ||
| SAS2000 | 16 BAR | 2000CFM | 415V | 20 | 6" | R-22 |
High-Pressure Air Dryer
Features:
- Compact, lightweight & easy to operate.
- Maximum working pressure of 42 bar.
- Ideal for PET Industry Usage.
- High-efficiency refrigeration compressor.
- Performance and compactness of the machine reduce the pressure drop and allow quick and easy installation
technical specifications
| Model | Maximum Working Pressure |
Air Treatment Capacity |
Supply Voltage | Power Consumption |
Air Out Connection |
Dimensions (inch) |
Weight (kg) |
Refrigerant |
|---|---|---|---|---|---|---|---|---|
| SAS40HP | 35BAR | 40CFM | 230 V | 2 | 1/2" | 26"*16"*25" | 55 | R-134 |
| SAS60HP | 35BAR | 60CFM | 230 V | 3 | 1/2" | 31.5"*19"*27.5" | 75 | R-134 |
| SAS80HP | 35BAR | 80CFM | 230 V | 4 | 1" | 35"*26"*36" | 120 | R-22 |
| SAS100HP | 35 BAR | 100CFM | 230 V | 4 | 1" | 35"*26"*36" | 120 | R-22 |
| SAS150HP | 35BAR | 150CFM | 230 V | 5 | 1" | 35"*26"*36" | 130 | R-22 |
| SAS200HP | 35BAR | 200CFM | 415V | 4.5 | 1.5" | 45"*26"*37" | 180 | R-22 |
| SAS250HP | 35BAR | 250CFM | 415V | 6 | 2" | 45"*26"*37" | 200 | R-22 |
| SAS300HP | 35 BAR | 300CFM | 415V | 6.5 | 2" | 45"*26"*37" | 225 | R-22 |
| SAS400HP | 35BAR | 400CFM | 415V | 7 | 2" | 65"*30"*42" | 400 | R-22 |
| SAS500HP | 35BAR | 500CFM | 415V | 8 | 2" | 65"*30"*42" | 450 | R-22 |
| SAS600HP | 35BAR | 600CFM | 415V | 8 | 2" | 65"*30"*42" | 520 | R-22 |
Heatless Air Dryer
The Heatless Air Dryer is the simplest of all desiccant-based air dryers. In this dryer, two desiccant towers are used. While one tower is in drying, the second tower undergoes regeneration simultaneously. Part of the dry air coming out from the tower in-line goes for the regeneration of the second tower. Tower changeover takes place every 5 minutes by a sequence controller mounted in the control panel. The purge loss in around 10% of dry air. The changeover will take place through PLC/timer and continuous dry air will be received at the outlet.
Salient Feature:
- Simple design filled with Activated Alumina as a drying desiccant.
- Capacity from 25 CFM to 2500 CFM.
- Dew Point Range (-) 40 to (-) 60°C.
- Pressure Range 5 to 15Kg/cm2g.
- Power consumption is only 60Watt to operate Solenoid Valve.
- Long Desiccant Life.
- Low initial cost & operational cost.
- Requires no maintenance.
- Skid-mounted modular design.
technical specifications
| Model No. | M3/Hr | CFM | Pipeline Size |
Approx. Space Requirement [MM] | ||
|---|---|---|---|---|---|---|
| (MM) | L(mm) | W(mm) | H(mm) | |||
| SASHL-10 | 15 | 10 | 15 | 600 | 600 | 750 |
| SASHL-20 | 35 | 20 | 15 | 600 | 600 | 1000 |
| SASHL-30 | 50 | 30 | 15 | 600 | 600 | 1200 |
| SASHL-50 | 85 | 50 | 25 | 700 | 700 | 1800 |
| SASHL-100 | 170 | 100 | 25 | 800 | 800 | 1800 |
| SASHL-150 | 250 | 150 | 40 | 800 | 800 | 2200 |
| SASHL-200 | 350 | 200 | 40 | 1000 | 1000 | 2200 |
| SASHL-500 | 850 | 500 | 50 | 1400 | 1400 | 2400 |
| SASHL-1000 | 1700 | 1000 | 80 | 1600 | 1600 | 2600 |
| SASHL-1500 | 2550 | 1500 | 100 | 2000 | 2000 | 3000 |
| SASHL-2000 | 3400 | 2000 | 100 | 2000 | 2000 | 3000 |
| SASHL-2500 | 4250 | 2500 | 100 | 2000 | 2000 | 3000 |